本文简要介绍潜艇压载水系统的功能，提出新型气囊式压载水系统及其构成。对气囊充气过程进行深入分析，并建立初始充气阶段的多节点结构模型及主充气阶段的质量阻尼模型。采用流固耦合软件ADINA对气囊充气过程进行数值模拟。结果为今后气囊展开过程控制方案提供参考的依据，并为气囊式压载水系统机理研究提供思路。
In this article, the function of submarine ballast water system is briefly introduced, and the precept and structure of a new type of ballonet ballast water system are put forward. The charging process of the system is deeply analyzed. The multi-node structure model of the initial charging process and the mass spring damper model of the main charging process are established. The fluid-structure coupling software ADINA is used to simulate the deploying process. This paper provides a reference for the control scheme of ballonet deploying process in the future, and provides a thought for the mechanism research of ballonet ballast water system.
2025,47(7): 54-58 收稿日期：2024-5-14
DOI：10.3404/j.issn.1672-7649.2025.07.011
分类号：U662
作者简介：王明剑(1984-),男,硕士,高级工程师,研究方向为船舶与海洋结构物设计制造
参考文献：
[1] 王明剑, 陈庆, 张绳. 气囊技术用于潜艇应急上浮方案探讨[J]. 舰船科学技术, 2009, 31(4): 1–4.
WANG M J, CHEN Q,ZHANG S. Discussion of ballonet technology used for submarine emergency ascend[J]. Ship Science and Technology, 2009, 31(4): 1-4.
[2] SASAGAWA T, TANAKA M. Construction of a reduced-order model based on tensor decomposition and its application to airbag deployment simulations[J]. Scientific Reports, 2023, 13(1): 11241.
[3] 潘弘历. 登乘平台充气展开过程技术研究[D]. 哈尔滨：哈尔滨工程大学, 2020.
[4] 信志涛. 空间气囊在燃气作用下充气展开过程数值模拟[D]. 南京：南京理工大学, 2018.
[5] 高浩鸿. 某型无人机缓冲气囊设计及原理性试验研究[D]. 南京：南京航空航天大学, 2021.
[6] MEDURI S, CREMONESI M, FRANGI A, et al. A Lagrangian fluid–structure interaction approach for the simulation of airbag deployment[J]. Finite Elements in Analysis and Design, 2022, 198: 103659.
[7] 卢正起, 李楷, 常松亮, 等. 基于ALE的充气式海上围栏系统气囊单元优化设计[J]. 大连理工大学学报, 2023, 63(3): 282-290.
[8] LIU Z, LI H, LI L. Anti-explosion performance analysis of marine interdiction system based on ALE method[J]. Heliyon, 2023, 9(3).
[9] ZHANG H, YANG Y, CAI R. Application of mass particle methods in the shape design for scientific balloons[J]. Journal of Aircraft, 2024: 1–18.
[10] 汪娜, 彭雄奇, 鲁宏升, 等. 应用CPM法模拟折叠气囊[J]. 机械工程学报, 2015, 51(12): 120-126.
[11] 李亚明, 韩忠浩, 张璇, 等. 基于粒子法的汽车侧面安全气囊仿真[J]. 汽车实用技术, 2017(4): 133-134.
[12] 潘星, 曹义华. 降落伞开伞过程的多结点模型仿真[J]. 北京航空航天大学学报, 2008(2): 187–191.
