利用AMESim软件建立柴油机喷射系统仿真模型,对柴油机的结构参数进行匹配优化,选取5种比较合理的方案,并将其中的两组导入到AVL-BOOST整机仿真模型中,选取最优的供油定时角。在定喷油量、定供油定时角前提下,将不同喷油速率导入到柴油机仿真模型当中,研究不同喷油速率对柴油机缸内温度、压力、排放、放热率以及油耗和转矩的影响。结果表明:合理的喷油速率和供油定时角能进一步优化柴油机的综合性能,同时选取1组动力性能和经济性比较好的方案,进行柴油机的台架试验,仿真和实验的误差在2%以内。结果表明仿真有助于探索柴油机的综合性能规律。
Simulation model of diesel engine injection system with variable fuel injection rate was established by AMESim. The structure parameters of diesel engine were optimized by the model and selected five reasonable schemes. The soft of AVL-BOOST was used to establish the model of diesel engine, with fuel injection rate brought into the engine model among the two schemes, to research the effect of different fuel injection rates on cylinder temperature, cylinder pressure, heat release rate, emission, fuel consumption and torque, and simulation results show the performance of the engine can be optimized by the injection rate shaped as suitable fuel injection advanced angle. And selected a set of best power and economy performance, into the diesel engine bench test, the error of simulation and experiment is less than 2%. The research conclusions can help to explore the law of fuel injection rate improving the engine performance.
2016,38(10): 111-115 收稿日期:2016-1-15
DOI:10.3404/j.issn.1672-7619.2016.10.022
分类号:U664
基金项目:2016年广西教育厅资助项目(KY2016YB473)
作者简介:张志清(1982-),男,博士,讲师,研究方向为现代轮机管理。
参考文献:
[1] 范立云. 新型电控柴油喷射系统的开发与性能研究[D]. 大连:大连理工大学, 2008.
[2] 成晓北, 黄荣华, 鞠洪玲, 等. 柴油机碳烟排放的数值模拟及试验研究[J]. 汽车工程, 2007, 29(8):654-659, 663.
[3] 陈海龙, 欧阳光耀, 黄康. 增压式高压共轨柴油机燃烧排放特性研究[J]. 内燃机工程, 2012, 33(6):39-44.
[4] 王军, 张幽彤, 仇滔, 等. 柴油机高压共轨压力控制的动态仿真与分析[J]. 系统仿真学报, 2009, 21(9):2492-2495.
[5] 乔英志. 4190型柴油机工作过程仿真与性能优化[D]. 厦门:集美大学, 2013.
[6] 张志清. 基于AMESim柴油机电控单体泵喷射系统仿真研究[J]. 制造业自动化, 2014, 36(19):79-82, 87.
[7] 文勇, 张振东. 基于AMESim的柴油机喷油器的仿真研究[J]. 汽车科技, 2011(6):38-41.
[8] 阮见明, 董健, 潘志翔. 压缩比对内燃机性能的影响研究[J]. 内燃机, 2011(3):13-15.
[9] 袁士毫, 殷晨波, 刘世豪. 基于AMESim的平衡阀动态性能分析[J]. 农业机械学报, 2013, 44(8):273-280.
[10] 何超, 汪勇, 李加强, 等. 高压共轨柴油机燃烧与二氧化氮排放特性研究[J]. 内燃机工程, 2013, 34(1):13-17.