固体浮力材料是现代深潜技术的重要组成部分之一,是深潜器设计装备的六大关键技术之一,也是海洋勘察及深海工程中最普遍应用的一种材料。这种材料主要是为深海装置提供浮力,以实现深海装置的悬浮定位,无动力上浮下潜,增大有效载荷,减少外型尺寸。固体浮力材料在应用到深水装备之前,需要对其关键性能指标进行检验,包括密度、高压吸水率和体积弹性模量等,以保证深水装备的安全使用。其中,体积弹性模量的检验则是一个技术难点。鉴于此,本文综述国内外固体浮力材料体积弹性模量的测试方法,包括仿真计算法、超声测量法和高压原位测试法,为水下装备设计开发人员提供参考。
Solid buoyancy materials are one of the important components of modern deep-diving technology, one of the six key technologies in the design and equipment of deep-sea vehicles, and the most commonly used material in marine surveys and deep-sea engineering. This material mainly provides buoyancy for the deep-sea device to realize the floating positioning, floating up and down without power, increasing the effective load and reducing the size. Before solid buoyancy materials are applied to deep-water equipment, their key performance indicators, including density, high-pressure water absorption, and bulk elastic modulus, need to be tested to ensure the safe use. Among them, the inspection of bulk elastic modulus is a technical difficulty. In view of this, this article reviews the testing methods of bulk elastic modulus of solid buoyant materials, including: simulation calculation method, ultrasonic measurement method and high-pressure in-situ testing method, to provide references for underwater equipment design and development personnel.
2021,43(6): 1-6 收稿日期:2021-04-08
DOI:10.3404/j.issn.1672-7649.2021.06.001
分类号:TB34
基金项目:国家重点研发计划(2019YFC0311401,2019YFC0311402);中国科学院青年创新促进会(2019029)
作者简介:马利斌(1978-),男,高级工程师,主要从事潜水器设计技术研究
参考文献:
[1] 潘顺龙, 张敬杰, 宋广智. 深潜用空心玻璃微珠和固体浮力材料的研制及其研究现状[J]. 热带海洋学报, 2009, 28(4): 17–21
[2] 王平, 严开祺, 潘顺龙, 等. 深水固体浮力材料研究进展[J]. 工程研究-跨学科视野中的工程, 2016, 8(2): 223–9
[3] 刘艳, 刘文智, 马春霞. 深水固体浮力材料的制备及性能研究[J]. 舰船科学技术, 2017, 39(3): 87–90
[4] 熊利, 许晓武, 金星. 深海固体浮力材料的研制及性能探讨[J]. 矿冶工程, 2018, 38(5): 33–5
[5] 严开祺. 空心玻璃微球力学性能研究方法及其应用探索[D]. 北京:中国科学院大学, 2012.
[6] 严开祺, 谢虓, 张敬杰, 等. 高性能空心玻璃微球的力学特性研究[J]. 材料导报, 2011, 25(17): 116–21, 30
[7] 应枭. 固体浮力材料的力学性能研究[D]. 大连:大连理工大学, 2019.
[8] 宋晓睿, 杨辉. 空心玻璃微球制备技术研究进展[J]. 硅酸盐学报, 2012, 40(3): 450–7
[9] 张敬杰, 宋广智, 崔燕菲, 等. 一种空心玻璃微球软化学制备方法和所制空心玻璃微球及其应用, CN201210056295.5.
[10] 朱忠华, 赵俊海, 胡震, 等. 高静水压力下浮力材料的浮力损失研究[C]// 2008年船舶水动力学学术会议暨中国船舶学术界进入ITTC30周年纪念会论文集, 杭州, 2008: 218-26.
[11] 陈鹿, 王芳, 崔维成, 等. 全海深载人潜水器用浮力材料的有效弹性模量特性研究[J]. 船舶力学, 2019, 23(12): 1486–99
[12] MARUR P R. Numerical estimation of effective elastic moduli of syntactic foams[J]. Finite Elements in Analysis and Design, 2010, 46(11): 1001–7
[13] YU M, ZHU P, MA Y. Global sensitivity analysis for the elastic properties of hollow spheres filled syntactic foams using high dimensional model representation method[J]. Computational Materials Science, 2012, 61: 89–98
[14] MYLAVARAPU P, WOLDESENBET E. Characterization of syntactic foams — an ultrasonic approach[J]. Journal of Cellular Plastics - J CELL PLAST, 2008, 44: 203–22
[15] ROHATGI P, MATSUNAGA T, GUPTA N. Compressive and ultrasonic properties of polyester/fly ash composites[J]. Journal of Materials Science, 2009, 44: 1485–93
[16] 陈先, 周媛, 卢伟. 固体浮力材料[M]. 北京: 化学工业出版社, 2011.
[17] 陈先, 吴则华, 周媛, 等. 固体浮力材料体积弹性模量测量装置及测试方法, CN200810158754.4.[P].
[18] 赵俊海, 马利斌, 刘涛. 高静水压力下浮力材料的浮力损失测试装置及方法, CN200810022677. X.[P].
[19] 赵俊海, 马利斌, 刘涛. 浮力损失测试装置, CN200820040402.4.[P].
[20] 马利斌, 赵俊海, 侯德永. 高静水压力下浮力材料的体积收缩率测试方法, CN201010559527. X.[P].
[21] 李东梁, 高永宁, 周阁丽, 等. 一种模拟深海环境下浮力材料浮力损失的测量方法, CN201811569359.5.[P].
[22] 严开祺, 王平, 张敬杰, 廖斌. 一种固体浮力材料浮力损失测量装置, CN202020830000.5.[P].
[23] 严开祺, 王平, 张敬杰, 廖斌. 一种固体浮力材料体积弹性模量测量方法, CN202010421175.5.[P].
[24] 严开祺, 王平, 张敬杰, 廖斌. 一种弹性模量测量装置以及测量方法, CN202110254591.5.[P].
[25] 严开祺, 王平, 张敬杰, 廖斌. 一种吸水率测量装置以及测量方法, CN202110254585. X.[P].