高温独立货罐温降性能是沥青运输船等船型开发设计的重要关注点。基于适当假设、热平衡微分方程、壁面传热特性和迭代法建立快速预报方法,对一型沥青运输船进行计算,应用CFD方法进行验证和对比。结果表明:快速预报方法具有工程适用性和一定保守性,温度梯度是造成2种方法计算结果差异的主要原因,实际温降数值应介于二者之间。快速预报方法可为高温独立货罐温降性能评估提供高效可靠的工具。
Temperature drop performance of high temperature independent cargo tank is an important point of focus on developing and designing ships such as asphalt tankers. Establish a quick predicting method based on proper hypotheses, differential equation of heat balance, heat transfer characteristics of walls and iterative method, compute on an asphalt tanker, verify and compare by using CFD method. The results show: quick predicting method is applicable in engineering for predicting temperature drop performance of high temperature independent cargo tank, but also be conservative. Gradient of temperature is the main factor results the difference between two methods. Actual temperature drop value may between the two methods. The quick predicting method can be an efficient and reliable tool for estimating the temperature drop performance of high temperature independent cargo tank.
2023,45(15): 59-64 收稿日期:2023-02-27
DOI:10.3404/j.issn.1672-7649.2023.15.011
分类号:U674.133.1
作者简介:黎峰(1983-),男,研究员,研究方向为高性能舵开发设计及货物系固设计
参考文献:
[1] 吴晓莲, 张志军. 12 800 DWT沥青船总体设计要点[J]. 船海工程, 2017, 46(4): 86–89
[2] 王国强, 吴晓莲. 37 000 DWT沥青船总体设计思路[J]. 船舶设计通讯, 2018(1): 7–11
[3] 仲琦, 黄锦涛. 独立货舱沥青船温度场分析[J]. 船舶设计通讯, 2018(1): 61–66
[4] 芮晓松, 朱刚, 刁海兵. 沥青船独立货罐支承结构优化设计[J]. 船舶, 2017, 28(6): 27–32
[5] 蒋军, 车驰东, 陆晟. C型LNG船货舱区温度场分析[J]. 船舶与海洋工程, 2018, 34(5): 9–14
[6] 韩宇, 郑坤, 牛志刚, 等. 12 000 m3 LNG加注船液货舱热分析[J]. 船海工程, 2021, 50(3): 37–40
HAN Yu, ZHENG Kun, NIU Zhi-gang, et al. Thermal analysis of cargo tanks of the 12 000 m3 LNG bunkering vessel[J]. Ship and Ocean Engineering, 2021, 50(3): 37–40
[7] 禹国军, 杨秋莉, 戴兵. 海上摇晃条件下油轮货油温降规律数值模拟研究[J]. 北京石油化工学院学报, 2018, 26(1): 63–68
YU Guojun, YANG Qiu-li, DAI Bing. Study of the characteristic of temperature drop of crude oil in an oil tanker subjected to oscillation motion during sea transportation[J]. Journal of Beijing Institute of Petrochemical Technology, 2018, 26(1): 63–68
[8] 赵志明, 尤世发, 杨占伟. 大型储油罐温降过程的研究进展[J]. 当代化工, 2014, 43(10): 2101–2103,2107
[9] 侯磊, 白宇恒, 黄维秋. 浮顶罐内原油温降计算方法研究[J]. 科技通报, 2010, 26(1): 159–164
[10] 李伟光, 李安邦, 徐新华, 等. 复杂船舶围壁传热系数取值探讨[J]. 中国舰船研究, 2014, 9(2): 78–83
LI Weiguang, LI Anbang, XU Xinhua, et al. [J]. , 2014, 9(2): 78–83. Heat transfer coefficient of complex ship casing walls[J]. Chinese Journal of Ship Research, 2014, 9(2): 78–83
[11] 杨世铭, 陶文铨. 传热学[M]. 第4版. 北京: 高等教育出版社, 2006.
[12] 中国船舶工业集团公司等. 船舶设计实用手册(舾装分册)[M]. 第3版. 北京: 国防工业出版社, 2013.
[13] 中华人民共和国国家技术监督局. GB/T 13409-92 船舶起居处所空气调节与通风设计参数及计算方法[S]. 北京: 中国标准出版社, 1992.
[14] 马峰, 郭兴隆, 傅珍, 等. PPA/SBS及PPA/橡胶粉复合改性沥青性能[J]. 应用化工, 2021, 50(3): 561–564