为了建立更加完整的筒盖系统仿真模型，利用AMESim软件搭建筒盖控制系统液压仿真模型，利用Simulink软件搭建筒盖控制系统控制部分仿真模型，采用AMESim和Simulink联合仿真的方式，完成了整个筒盖控制系统模型的搭建。接着在Simulink中搭建PID控制器，然后对该筒盖控制系统模型进行了仿真分析，结果显示该筒盖控制系统模型仿真效果良好，可操作性较强，有利于对控制算法的设计与验证。
In order to establish a more complete simulation model of the launcher cover system, AMESim software is used to build the hydraulic simulation model of the launcher cover control system, Simulink software is used to build the simulation model of the control part of the launcher cover control system, and co-simulation methods of AMESim and Simulink are adopted. The whole launcher cover control system model is built. Then the PID controller is built in Simulink, and the simulation analysis of the launcher cover control system model is carried out. The results show that the simulation effect of the launcher cover control system model is good, and more maneuverability, which is conducive to the design and verification of the control algorithm.
2025,47(13): 138-142 收稿日期：2024-8-23
DOI：10.3404/j.issn.1672-7649.2025.13.024
分类号：TP391.9
作者简介：胡相茹(1998-),男,硕士,助理工程师,研究方向为水下发射技术
参考文献：
[1] 倪火才. 潜地弹道导弹发射装置构造[M]. 哈尔滨: 哈尔滨工程大学出版社, 1998.
[2] 吴立柱, 张建宇. 基于AMESim的筒盖系统建模与特性分析[J]. 舰船科学技术, 2017, 39(23): 158-162.
WU L Z, ZHANG J Y. Modeling and characteristic analysis of cylinder cover system based on AMESim[J]. Ship Science and Technology, 2017, 39(23): 158-162.
[3] 贾海杰, 闫龙, 侯冬冬, 等. 基于Simulink仿真的发射筒盖反步控制算法研究[J]. 舰船科学技术, 2018, 40(13): 142-145.
JIA H J, YAN L, HOU D D, et al. Research on backward step control algorithm of launching canisters based on Simulink simulation[J]. Ship Science and Technology, 2018, 40(13): 142-145.
[4] 吴友生, 程栋, 刘东. 电液驱动水下发射筒开关盖装置高精度跟踪控制方法[J]. 液压与气动, 2023, 47(1): 182-188.
[5] 张瑛, 于朝, 沈刚. 基于延时补偿和三状态控制的筒盖开关盖过程控制(英文)[J]. 机床与液压, 2018, 46(6): 82-89+103.
[6] 卫超, 沈刚, 殷士才, 等. 传感器故障下发射装置筒盖系统的容错控制[J]. 液压与气动, 2021, 45(12): 93-99.
[7] 殷士才. 垂直发射井筒开关盖装置传感器容错控制方法研究[D]. 北京: 中国矿业大学, 2020.
[8] 梁全, 苏齐莹. 液压系统AMESim计算机仿真指南[M]. 北京: 机械工业出版社: 2014: 75-90.
